Hola,
¿eres nuevo aquí?

Regístrate gratis y conecta tu empresa con financiación pública, partners y proyectos.

Tengo cuenta

Regístrate

Ver video

OPTIJECT

Financiado

Cerrado

A novel NIR based instrument for in line monitoring during injection moulding

Injection moulding is a complex process and is dependent on the relationship between the supplied material and the processing conditions. The properties of the plastic materials are directly dependent on the temperature, time and... ver más

31/12/2012

INNVACIO I RECERCA...

2M€

Presupuesto del proyecto: 2M€

Líder del proyecto

INNVACIO I RECERCA INDUSTRIAL I SOSTENIBLE Los servicios de investigacion y desarrollo multidisciplinarjos dentro delambito de los proyectos subvencionados con la comision europea, ba...

TRL 4-5 | 14M€

Fecha límite participación Sin fecha límite de participación.

Ver 5 Participantes

Financiación concedida El organismo FP7 notifico la concesión del proyecto el día 2012-12-31 No tenemos la información de la convocatoria

0% 77% 100%

Características del participante

Este proyecto no cuenta con búsquedas de partenariado abiertas en este momento.

Información adicional privada

No hay información privada compartida para este proyecto. Habla con el coordinador.

5 Participantes

INNVACIO I RECERCA INDUSTRIA...

0.00€ | Lider

UNEXE

N.D. | Participante

MSL UK

N.D. | Participante

FUNDACIÓN ASCAMM

N.D. | Participante

Conecta tu I+D

¿Tienes un proyecto y buscas un partner? Gracias a nuestro motor inteligente podemos recomendarte los mejores socios y ponerte en contacto con ellos. Te lo explicamos en este video

Líder del proyecto

INNVACIO I RECERCA INDUSTRIAL I SOSTENIBLE Los servicios de investigacion y desarrollo multidisciplinarjos dentro delambito de los proyectos subvencionados con la comision europea, ba...

TRL 4-5 | 14M€

Presupuesto del proyecto 2M€

Fecha límite de participación Sin fecha límite de participación.

Descripción del proyecto Injection moulding is a complex process and is dependent on the relationship between the supplied material and the processing conditions. The properties of the plastic materials are directly dependent on the temperature, time and environment. Any change in the injection moulding variables, such as temperature, pressure and speed, the mould temperature, the mould cooling temperature, the backpressure and the cycle time, to mention but a few, can change the process stability, affecting the subsequent consistency and quality of the manufactured parts. The simultaneous control and adjustment of the injection moulding parameters and properties of the material poses a major challenge for plastics manufacturers and the subsequent manufacture of quality parts that are of a consistent high quality and free from defects proves difficult. Defect detection and quality improvements are mostly carried out on the basis of quality control of finished parts, using visual inspection, weighing the moulded parts or using off-line analytical and mechanical measurements. To date, the optimisation of certain parameters of the injection moulding has been carried out using off-line analysis of the finished products. This project will build on the results of past research that has demonstrated the feasibility of using near infrared spectroscopy as a quality control tool in an injection-moulding machine. The optical fibre probes allowed in-line process monitoring of the material passing through the injection moulder. Preliminary results showed that the near infrared system can detect several types of materials, can identify colour changes and moisture in materials. Access to a technology that would enable injection moulders to monitor and control their injection moulding processes in real time, would hold significant benefits for higher throughput and increased productivity, cost reductions, improved quality control, health and safety.

Conecta tu I+D

Entra hoy

Forgot your password?

Financiación

Empresas

CTIs/Universidades

Proyectos

Investigadores